top of page

Delivering Sensor Reading 
Overcome any Obstacles

Better Range and Reliable Frequency Band 
Penetrate walls and Reduce collisions
Sub-1GHz 6LoWPAN sensors

Replaceable Battery

915 MHz, 868 MHz
Internal Antenna

Low power ARM® 32-bit Cortex®-M4 CPU with FPU with many serial interfaces: SPI, I2C, UART, ADC, CAN, USB and GPIO.

Based on Certified SPIRIT1 very low power RF sub-1 GHz transceiver.

Internal Antenna can reach up to 100 meters.

Many sensors including 3-axis accelerometer, 3-axis magnetometer, 3-axis digital gyroscope, pressure, microphone, relative humidity, ambient light, temperature and UV sensor.

Small form factor (20x30mm), ready-to-use preinstalled with Sensors over 6LoWPAN 

demo and coin battery on-board.

Sub-1GHz 6LoWPAN sensors

Replaceable Battery

915 MHz, 868 MHz, 433MHz External Antenna

Low power ARM® 32-bit Cortex®-M4 CPU with FPU with many serial interfaces: SPI, I2C, UART, ADC, CAN, USB and GPIO.

Based on Certified SPIRIT1 very low power RF sub-1 GHz transceiver.

External Antenna can reach up to 600 meters.

Many sensors including 3-axis accelerometer, 3-axis magnetometer, 3-axis digital gyroscope, pressure, microphone, relative humidity, ambient light, temperature and UV sensor.

Small form factor (20x30mm), ready-to-use preinstalled with Sensors over 6LoWPAN 

demo and coin battery on-board.

Sub-1GHz 6LoWPAN to Wifi Gateway

USB Power Adaptor 

SensiSUB 6LoWPAN 
Gateway
PAN 

SensiSUB end-to-end solution for low power wide area networks (LPWAN) enabling cloud connectivity for sending and receiving sensor data over a long range Sub-1 GHz star network.

 

Sub-1 GHz Sensor to Cloud  enabling using protocols such as 6LoWPAN, M-BUS, Contiki or any propriety Sub 1 GHz Protocols. 

 

Thanks to ST's FP-NET-6LPWIFI1 an STM32 ODE software function pack you can connect your IoT node inside a 6LoWPAN Wireless Sensors Network to the Internet, by the means of a Wi - Fi network, and to connect the device to Watson IoT cloud services by the means of the MQTT protocol. 

(*) all products can be customized to fit project requirements

Cortex-M4 + Sub 1GHz

Sensors

Coin Battery

SIMSA.png

Datasheet

SensiSUB Datasheet

Adobe_PDF_Icon.svg_.png

Getting Started

SensiSUB Getting Started

Adobe_PDF_Icon.svg_.png

Flyer

SensiSUB Flyer

TECHNICAL RESOURCES & DOWNLOADS

SensiSUB

2-2.png

MCU

STM32L476xx ARM Cortex-M4

en.RS1010_communication_dark_blue-3.png

SUB 1GHz

SPSGRF (868, 915 MHz)
internal chip antenna

en.RS1010_communication_dark_blue-3.png

SUB 1GHz

SPSGRFC (433, 868, 915 MHz)
u.FL connector for external antenna

en.RS1761_MEMS_accelerometer_dark_blue-2.png

Accelerometer

LSM6DS3 3D accelerometer and 3D gyroscope

en.RS1760_MEMS_gyroscope_dark_blue.png

Gyro

LSM6DS3 3D accelerometer and 3D gyroscope

en.RS1762_MEMS_compass_dark_blue.png

Magnetometer

LIS3MDL 3-axis magnetometer

en.RS215_temperature_dark_blue.png

Temperature

HTS221TR Relative humidity and temperature

en.RS1902_humidity_dark_blue.png

Humidity

HTS221TR Relative humidity and temperature

en.RS1784_pressure_sensor_dark_blue.png

Pressure

LPS25H MEMS pressure sensor

Light Sensor

APDS-9250 Digital RGB, IR and Ambient Light Sensor with color detection

en.RS1763_MEMS_microphone_dark_blue.png

Microphone

MP34DT01-M Stereo digital microphone

Data Logger

AT25XE041B 4-Mbit SPI Serial Flash

UV

VEML6075 UV Sensor

Coin Battery

CR2032

Dual RG Led

LTST-C195KGJRKT

Dual color red-green LED

en.RS221_touch_screen_dark_blue.png

Push Button

SS304BS Push Button

Buzzer

ME05140SMC01 Buzzer

SensiSUB Module
Software Downloads

SensiSUB.bin

Demo sensors to IBM Cloud

based on FP-SNS-6LPNODE1

using porting instructions

Porting Instructions

Instruction how to port FP-SNS-6LPNODE1 to SensiSUB module

Patch

Patch for FP-SNS-6LPNODE1

Porting instruction need to be followed

FP-SNS-6LPNODE1

STM32 ODE Function Pack for IoT sensor node connecting 6LoWPAN net via sub-1GHz RF 

SensiSUB Module
Hardware Resources

Pinout 

Pinout for extensions and Arduino connector pins

Schematic

SensiSUB SIMSA 

schematics

Mechanical Drawing

SensiSUB SIMSA 

mechanical drawing

Download

3D STEP model

SensiSUB 3D STEP model. Fit with different CAD systems

Download

SensiSUB Gateway

Visualize sensors data on Cloud

Sub-1GHz 6LoWPAN to Wifi Gateway

Sub 1Ghz to Wifi bridge

out of the box  

sending sensors to cloud 

Develop Cloud Service with SensiSUB

SensiSUB GATEWAY Download Centre

Gateway.bin

Gateway bridging between 6LoWPAN to Wifi

based on FP-NET-6LPWIFI1

FP-NET-6LPWIFI1

STM32 ODE Function Pack for connecting 6LoWPAN IoT Nodes to the Internet through a Wi-Fi 

Schematic

SensiSUB Gateway 

schematics

SIMSAxxx-DKL Hadware Resources
(SED-PRO)

Schematic

SED-PRO development board schematics

Mechanical Drawing

SED-PRO development board mechanical drawing

SIMSA-DKL

SensiSUB Development Kit

SIMSA-DKL build for Professional Firmware Developers.

 

SIMSA-DKL include both:

   SED-PRO ST-Link debugger

   SIMSA-PRO Sensor Module

(*)and Arduino connectors for fast prototyping 

bottom of page