
DELIVERING SENSORS DATA OVER VERY LONG DISTANCE
Low-power wide-area networks (LPWANs)
Freedom from hardware development and production logistics

Rechargeable Battery with Power Adaptor
u.FL or SMA connector for external Antenna
SensiLoRa v1.0 LoRa Modem with External MCU
Certified Murata LoRa CMWX1ZZABZ-091.
External Low power ARM® 32 bit Cortex®M4 CPU, FPU with many serial interfaces: SPI, I2C, UART, SD- CARD, ADC, CAN, USB and GPIO.
Sensors including 3-axis accelerometer, 3-axis Magnetometer, 3-axis Gyroscope, pressure, microphone, relative humidity, ambient light and temperature sensors.
Small size 30x50mm, ready-to-use of the shelf ,Integrating Data-Logger equipped with Rechargeable battery of 750mA via power adaptor with round power jack.
(*) all products can be customized to fit project requirements

Powerful MCU + Modem LoRa with Sensors
Rechargeable battery

Datasheet
SensiLoRa v1.0 Datasheet

Getting Started
SensiLoRa v1.0 Getting Started
Battery
750mA Rechargeable Battery
TECHNICAL RESOURCES & DOWNLOADS
SensiLoRa v1.0
Components Datasheets
3D STEP model
SensiLoRa v1.0 3D STEP model.
Mechanical Drawing
SensiLoRa V1.0 SIMLA-JFR mechanical drawing
Schematic
SensiLoRa v1.0 SIMLA-JFR
schematics
Pinout
Pinout for extensions and Arduino connector pins

Single Core MCU + LoRa with Sensors
Rechargeable battery
TECHNICAL RESOURCES & DOWNLOADS
SensiLoRa v2.0
Software Downloads
SensiLoRa-2.bin
Demo including LoRa connectivity, Sensors
based on I-CUBE-LRWAN
I-CUBE-LRWAN
STM32L476 and Murata
LoRaWAN CMWX1ZZABZ-078
SW package with sensors
SILA-JFR(E/A)-PRO
Hardware Resources
Pinout
Pinout for extensions pins
Schematic
SensiLoRa v2.0 SILA-JFR(E/A) schematic
Mechanical Drawing
SensiLoRa v2.0 SILA-JFR(E/A) mechanical drawing
3D STEP model
SensiLoRa 2.0 3D STEP model. Fit with different CAD systems
Schematic
SILA-JFR(E/A)-DKL development board
schematics
Mechanical Drawing
SILA-JFR(E/A)-DKL development board mechanical drawing